BRE MK60E5 to Haltech CAN Gateway
If you're looking for an easy way to add MK60E5 ABS data to your Haltech ECU, this is the way to do it. Using this gateway adds all 4 wheel speed sensors, Lateral Gs, Yaw rate, all 5 brake pressure sensors, and ABS Fault Warning allowing for complex traction control strategies.
Simple 6 wire hookup, or less with our optional Nearly PnP harness. Calibration is easy within the Haltech NSP software and base calibration data is included. The device is programmed to appear as a PD16 Box C and Box D. If PD16 C or D is already in use contact us before ordering and the programming can be changed.
Standard Package includes CAN Gateway, matching DTM8 connector and 8x DTM terminals. Two blanking pins are also included for the unused #4 and #5 positions.
The Nearly PnP kit comes with the Haltech side already terminated to a DTM4 connector with 18" of Tefzel wire and DR-25, allowing for easy connection into a free port on your Haltech CAN bus. The MK60E5 side comes with 4 feet of 22ga twisted pair Tefzel wire covered in DR-25, ready to be routed to your MK60E5 CAN output.
** This will NOT work with the regular MK60 systems (E46, etc). **
** Only the MK60E5 and MK60E1 (unconfirmed) are compatible. **
3.0" H x 3.4" W x 1.9" D
Mounting points 4.3" on center
Input Voltage: 6-30vdc, reverse polarity protected
Current Draw: ~70mA @ 12vdc